Guide · Bearings & Grip Tape

Skateboard Bearings Guide: ABEC Rating Explained

A higher ABEC rating doesn't make you faster. Here's what the number actually measures, plus what pros ride instead.

Some links on this page are affiliate links. If you buy through them, SkateSetups may earn a commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

This skateboard bearings guide starts with the one myth worth killing: a higher ABEC rating does not make your skateboard faster. ABEC is a manufacturing tolerance grade, a measure of how precisely the bearing's components are made, not a speed rating. It was never designed to account for the side-impact loads skateboarding actually puts on bearings, which is a big part of why it doesn't predict real-world performance the way the number suggests it should. If you're building a full setup rather than just swapping bearings, the skateboard setup guide covers how this fits with your deck, trucks and wheels.

What Pros Actually Ride

Among the pros we track with bearing data, Bones dominates in one form or another:

Bearing Pros riding it
Bones Swiss 64
Bronson 54
Bones Bearings 26
Bones 18
Modus Bearings 11
Andale 7
Cortina Bearing Co. 7
Bones Ceramics 3
FKD Bearings 3
SKF Bearings 3
Andale Swiss 2

The Bronson row above groups its Speed Co. sub-lines in with the standalone Bronson line. On their own, those sub-lines add another 21 pros, for a combined 54 overall, a strong second behind the combined Bones lineup. Bones Ceramics shows up too, a small but real signal that at least a few pros opt for ceramic over standard steel. For specific picks by use case, see our best skateboard bearings roundup.

What ABEC Actually Measures

ABEC stands for Annular Bearing Engineering Committee, and the scale (1, 3, 5, 7, 9) grades manufacturing precision: how tightly toleranced the bearing's dimensions are. That's a real, meaningful spec for industrial applications where bearings run at extremely high, consistent RPMs in a controlled environment.

Skateboarding isn't that environment. A skate bearing takes side-loading and impact every time you land a trick or roll over a crack, forces the ABEC scale doesn't measure at all. And the speed ceiling skateboarding actually operates at isn't close to where ABEC grading would matter anyway: the fastest a skateboard has ever gone is 91 mph, and even the lowest ABEC grade is rated well beyond speeds any skater will reach. The bottleneck was never the tolerance rating.

This is why Bones, one of the most pro-ridden bearing brands in our data, markets its Reds under a "Skate Rated" standard instead of an ABEC number. The rating most competitors lean on to sell bearings isn't the thing that actually matters for skateboarding.

Bearing Size: It's Basically Always 608

Skateboard bearings come in one standard size almost universally: 8mm bore, 22mm outer diameter, 7mm width, known as 608. If you're buying bearings for a normal skateboard, this is the size, full stop.

The one thing worth checking before you buy: a small number of trucks use a 7mm axle instead of the standard 8mm, which needs a different bearing bore size to match. Confirm your axle size if you're at all unsure, but for the overwhelming majority of setups, 608 is the only number you need to know.

Steel vs. Ceramic

Standard skate bearings use steel balls, almost always chrome steel. Steel is durable and the proven default, but it's vulnerable to rust, so bearings that get wet need cleaning soon after or they'll corrode.

"Ceramic" skate bearings are almost always hybrids: ceramic balls running in steel races, not fully ceramic. The ceramic balls resist debris damage better than steel and don't need the same rust-prevention attention. The trade-off is impact resistance. Ceramic doesn't flex the way steel does, so a hard landing or slam is more likely to damage a ceramic ball than a steel one.

You'll see sellers claim ceramic bearings are around 40% stronger or last three to five times longer than steel. We couldn't find independent testing behind those numbers; they come from the brands selling the bearings. Treat them as marketing claims, not verified specs.

What Actually Matters

If brand and ABEC rating aren't the real variables, what is? Cleaning and lubrication. A mid-range steel bearing that gets cleaned regularly will outlast and outperform a premium bearing that never does. Dirt and grime inside the bearing housing slow it down far more than any manufacturing tolerance grade ever will.

For now, the most-used bearings ranking is the best place to see which specific products pros actually buy. For the actual cleaning process, see our how to clean skateboard bearings guide.

FAQ

Does a higher ABEC rating make you faster?

No. ABEC measures manufacturing tolerance, not speed, and it doesn't account for the side-impact loads skateboarding puts on bearings. Cleaning and lubrication affect your actual speed far more than the ABEC number on the box.

Do I need ceramic bearings?

Not unless you specifically want the debris resistance and don't mind the added impact fragility and cost. Steel bearings, kept clean, perform well for the vast majority of skaters, including most of the pros we track.

Do skateboard bearings need to be cleaned?

Yes. Dirt and moisture inside the bearing slow it down more than brand or ABEC rating ever will. A quick clean and relube every few weeks of regular riding keeps a bearing performing near its best.

Shop Bearings or Dial In the Rest

Browse the most-used bearings among pros, or see how they fit the rest of your setup.