Guide · Start Here

The Complete Skateboard Setup Guide

Every part of a setup, what it does, and what 453 pros actually ride, with a full breakdown of each piece one click away.

Some links on this page are affiliate links. If you buy through them, SkateSetups may earn a commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

A skateboard setup is the full combination of parts that makes a board ride: deck, trucks, wheels, bearings, bushings, mounting hardware, and grip tape. Every one of those seven parts affects how the board turns, pops, and holds up, which is why "just buy a complete" and "build your own" produce genuinely different boards, not just different price tags.

This guide breaks down what each part does, what the pros we track actually ride, and links to a full write-up on every piece so you're not guessing.

What Pros Actually Ride

We track 453 pro skateboarders' verified setups: real sourced gear, not guesses. A few things stand out across all of them:

Category Most-used Pros riding it
Trucks Independent Trucks Stage 11 68
Wheels Spitfire Wheels 46
Grip tape Mob Griptape 130
Bearings Bones Swiss 64
Bushings Bones Hard Bushings 11
Hardware Diamond Supply Co. Hardware 15
Shoes Vans 38
Decks Chocolate 8

Mob Griptape's number stands out: 130 of the pros we track ride it. Nothing else in the data comes close. Decks go the opposite way: Chocolate leads, but with just 8 riders, which tells you decks are the one part of a setup pros don't converge on. Sponsorship and personal brand loyalty drive deck choice far more than any real performance difference between brands.

Want the full ranked list, not just the #1? The most-used gear hub breaks down bearings, trucks, wheels, grip tape, hardware, and bushings by usage, with buy links for each. There's also a full shoe brand ranking if footwear is what you're after.

The Parts of a Skateboard Setup

Deck

The deck is the board itself. Width is the spec that actually matters, and it should match your height, foot size, and skating style more than any trend. Most pros cluster tighter around a specific width than you'd expect, even though deck brand is the most fragmented category in the data.

More on sizing: What Size Skateboard Should I Get? and the most-used decks ranking. For the full breakdown of concave and shape, see our deck concave guide.

Trucks

Trucks bolt to the deck and let it turn. Width needs to match deck width; a mismatch here is one of the most common beginner mistakes. Independent is the dominant brand across the pros we track, with Thunder as the main alternative for street-focused setups.

Full breakdown: Independent vs Thunder Trucks, the most-used trucks ranking, how tight they should be, and how truck sizing works across brands.

Wheels

Wheel size and durometer (hardness) change how a board rolls, pops, and handles rough ground. Smaller, harder wheels suit technical street skating; larger, softer wheels suit cruising and rough terrain. Spitfire leads usage among the pros we track. For why diameter and width actually matter, see our wheel size guide.

Where to go deeper: Best Skateboard Wheels and the most-used wheels ranking.

Bearings

Bearings sit inside the wheels and determine how freely they spin. Bones Swiss is the most common choice among the pros we track, though keeping them clean matters more than the brand name once you're past the bargain-bin stuff. For why ABEC rating doesn't matter the way the number on the box suggests, see our skateboard bearings guide, for specific picks, see the best skateboard bearings roundup, and for how to actually clean them, see our how-to guide.

Full breakdown: the most-used bearings ranking.

Bushings

Bushings are the urethane rings inside the truck that control how it turns. Softer bushings turn easier, harder bushings resist turning at speed. Getting this wrong is why some setups feel either sluggish or unpredictably loose.

More on this: the most-used bushings ranking and matching bushing hardness to your weight and riding style.

Hardware

Hardware is the nuts and bolts that mount the trucks to the deck. It's the least performance-critical part of a setup: length needs to match your deck-plus-riser stack, and that's about it.

Full breakdown: the most-used hardware ranking and picking the right length and riser height.

Grip Tape

Grip tape is the sandpaper-textured sheet on top of the deck that keeps your feet locked in. It's the one part of a setup pros genuinely agree on: Mob Griptape alone covers 130 of them.

Where to go deeper: the most-used grip tape ranking, and for specific picks, see the best skateboard grip tape roundup.

How to Build One

Building a setup from individual parts takes about 20 minutes with a skate tool: grip the deck, mount the trucks, press bearings into the wheels, mount the wheels, and adjust truck tightness to taste. A pre-built complete skips all of this and avoids sizing mistakes, which is why most beginners start there. For the full technique-level walkthrough, see our step-by-step assembly guide. New to this? See how a beginner's starting point actually differs from a pro's, or if you're buying rather than building, see our picks for the best skateboard setup for beginners.

What It Costs

A full custom setup built from separate parts typically runs $140–$250. Budget builds start closer to $90–100 depending on what you pick. Completes are usually cheaper up front but limit your choice of exact trucks, wheels, and bearings, and the cheapest big-box ones use genuinely low-quality parts rather than just parts you might not have picked yourself. A complete from a real skate brand avoids that second problem. For the full per-part breakdown, see our skateboard setup checklist.

Setup by Discipline

The "right" setup changes depending on what you actually skate:

Common Mistakes

  • Trucks that don't match deck width. One of the most common setup mistakes, and the easiest to avoid: check the width before you buy.
  • Over-tightening trucks. Beginners often crank trucks down thinking tighter means more control. It usually just makes the board feel like a brick.
  • Ignoring bearing maintenance. A mid-range bearing that actually gets cleaned can keep up with, sometimes beat, a premium one that's never been touched.

For the full list (nine mistakes, not three), see our dedicated guide.

FAQ

How much does a skateboard setup cost?

A solid custom-built setup typically runs $140–$250, with budget builds starting closer to $90–100. A pre-built complete is usually cheaper and a safer starting point if you're new.

Can I use any trucks with any deck?

No. Truck width needs to match deck width, or the wheels will either stick out past the edge of the deck or sit too far underneath it. Always check a sizing chart before mixing brands.

Do I need different gear for street vs. park skating?

Not completely different gear, but different specs. Street setups lean narrower and harder; park setups sit in the middle; vert and transition setups go wider and bigger.

Explore the Full Setup Breakdown

Browse every pro skater's complete gear, or jump straight to a gear category ranking.