Some links on this page are affiliate links. If you buy through them, SkateSetups may earn a commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Every retailer's durometer chart disagrees with the next one: SkatePro, Radline, and SkateboardersHQ all land in different places for the same rider weight. What's actually consistent: bushings run on the same durometer scale as wheels, and the higher the number, the harder the bushing. Soft bushings (roughly under 90A) turn easily with little effort. Medium (90–96A) sits in the middle. Hard (96A and up) resists turning and favors stability over easy carving. Weight and riding style push you toward one end or the other, but neither is exact. Treat any chart, including the one below, as a starting point.
What Pros Actually Ride
Among the pros we have bushing data for, hard bushings dominate:
| Bushing | Pros riding it |
|---|---|
| Bones Hard Bushings | 11 |
| Bones Medium Bushings | 3 |
| Bones Standard Bushings | 2 |
| Bones Hardcore Bushings (Medium) | 2 |
| Thunder Bushings (Clear) | 1 |
| Bones Bushings | 1 |
| Independent Bushings (Soft) | 1 |
| Venture Stock Bushings | 1 |
That's 22 pros total, out of the hundreds we track. Bushing hardness is one of the thinnest-documented specs in our database: it rarely gets mentioned in interviews or sponsor pages the way deck size or truck brand does. The sample also skews heavily toward Bones, since they're the brand most pros' sponsors stock by default. With that caveat upfront: 11 of the 22 run a hard bushing, tracking with the idea that harder setups favor stability at speed, exactly what pro-level street and transition skating demands.
See the most-used bushings ranking for the full breakdown by product.
Durometer by Weight
SkatePro suggests 81–85A for lighter riders wanting a soft feel and 86–90A for the same weight wanting something stiffer. Radline calls 95–97.5A "hard" and recommends it starting around 60kg. SkateboardersHQ just says 87–92A is "fine" for a regular skateboard, full stop. The spread is often 10 points of durometer for what's supposed to be the same rider.
So instead of handing you one chart as if it's settled, here's the rough range where most sources overlap:
| Rider weight | Typical range |
|---|---|
| Under ~65kg (143 lbs) | 81–90A |
| ~65–80kg (143–176 lbs) | 86–95A |
| 80kg+ (176 lbs+) | 95A and up |
Use this as a starting point, not a rule. If you already have bushings in your trucks, check their durometer and adjust from there rather than chasing a number from a chart you've never ridden. Riding style matters as much as weight. We'll get to shape and style next.
Shape: Cone vs. Barrel
Shape changes the feel as much as hardness does. A cone-shaped bushing is tapered and turns more easily, more responsive, less stable. A barrel-shaped bushing is a straight cylinder and resists turning more, adding stability, especially at speed.
The standard factory setup pairs a cone bushing on top (the boardside bushing) with a barrel bushing on the bottom (the roadside bushing). That combination balances easy initial turn-in with stability once you're leaned over.
A few common variations:
- Double barrel: More stable, less turn. Favored for vert and fast transition riding.
- Double cone: Softer, looser, more of a "surfy" feel. Favored for cruising and carving.
- Reversed (barrel top, cone bottom): Increases responsiveness over the standard setup without going all the way to double cone.
Shape and hardness stack. A soft double cone setup turns dramatically easier than a hard double barrel setup at the same kingpin tightness. See our truck tightness guide for how that dial factors in separately.
By Riding Style
Street skaters tend toward harder bushings, consistent with the generally tighter, more stable setups street skating favors for grinds and landings.
Cruising and carving setups usually run softer, often double cone: the whole point is easy, flowing turns, not locked-in stability.
Park and bowl skating leans harder, closer to what vert riders run, since speed through transitions rewards the same stability that street skaters want for landings, just at higher speed.
None of this is absolute. A lighter street skater and a heavier cruiser might land on the same durometer for completely different reasons. Weight, style, and personal feel all factor in together, not separately. For how truck brand choice splits by discipline, see the most-used trucks ranking.
How This Connects to Truck Tightness
Bushing hardness and kingpin tightness work on the same thing: how easily your truck turns. They're not the same adjustment, though. Tightness is free and instant, a quarter-turn of the kingpin nut. Bushing hardness is a part swap that changes the ceiling of what tightness can do.
If you're maxed out on kingpin tightness in either direction and the board still doesn't feel right, that's the signal to change bushing hardness or shape instead of fighting the kingpin nut. See the full breakdown on adjusting tightness.
FAQ
How often should I replace bushings?
There's no fixed schedule. Bushings wear out when they lose their rebound: they feel mushy, crack, or the board doesn't snap back to center the way it used to. Riders who skate daily often replace them every few months; occasional riders can go much longer.
Can I mix cone and barrel shapes?
Yes, and it's actually the standard setup: cone on top, barrel on bottom. Mixing isn't a workaround, it's how most trucks ship from the factory.
Do all brands use the same durometer scale?
They use the same A-scale numbering, but brands don't calibrate identically. A 90A from one brand doesn't always feel like a 90A from another. If you're switching brands, treat the number as a rough guide and adjust by feel rather than assuming an exact match.
Dial in the rest of the setup. See the complete setup guide for everything else.