Guide · Build & Assemble

Skateboard Setup Checklist: What You Actually Need (and What It Costs)

Seven parts, real cost ranges, and where you can actually save money.

A full skateboard setup is seven things: a deck, trucks, wheels, bearings, mounting hardware, grip tape, and the bushings that come pre-installed in the trucks. Built from separate parts, that typically runs $140–$250, with budget builds closer to $90–100. Here's the full checklist and what each piece tends to cost.

The Checklist

  • Deck: roughly $25–$120 depending on construction and brand. Width is the decision that actually matters here; see our deck sizing guide before you buy.
  • Trucks (one pair): roughly $20–$80. See Independent vs. Thunder if you're deciding between the two biggest brands.
  • Wheels (set of four): roughly $15–$70. See our best skateboard wheels picks for what actually holds up.
  • Bearings (set of eight): roughly $8–$80, with ceramic and premium sets at the top of that range. See best skateboard bearings for picks, and how to clean them once you've got a set.
  • Mounting hardware: usually under $10. Nothing to overthink here.
  • Grip tape: usually $8–$15 a sheet.
  • Bushings: these come pre-installed in whatever trucks you buy. Don't count them as a separate line item unless you're swapping them out later.

For the actual assembly process once you've got everything, see our step-by-step assembly guide.

What It Actually Costs

Add up the ranges above and a custom build from separate parts lands at $140–$250 for most setups. Go cheap across the board and you can land closer to $90–100, sometimes a touch lower, since the floors above are rough, not fixed. What pushes a build toward the top of that range is almost always the deck and the bearings. A premium 7-ply deck and a set of ceramic bearings alone can eat half the budget, while trucks, wheels, hardware, and grip tape stay fairly flat no matter what you pick.

Complete vs. Custom: Which Costs Less?

A pre-built complete is usually cheaper upfront than buying every part separately, since it's sold as one unit rather than four separate purchases each with their own markup. The trade-off is choice, and sometimes quality: a complete locks you into whatever trucks, wheels, and bearings the brand picked, and the cheapest big-box completes often cut corners on those parts themselves, with soft wheels, loose unbranded bearings, and heavier hardware that doesn't perform like gear from an actual skateboard company. A complete from a real skate brand avoids that problem while still costing less than building custom. See the complete setup guide for more on that trade-off, our pro vs. beginner setup comparison for why starting with a complete is usually the right call for a first board anyway, and our picks for the best skateboard setup for beginners, all from real skate-company brands rather than the shrink-wrapped kind, if you're ready to buy one.

Budget Checklist: Where to Save, Where Not To

Bearings are the easiest place to save without actually losing anything. A mid-range steel set that gets cleaned regularly keeps up with a premium one that doesn't. Grip tape and hardware are already cheap enough that there's no real savings to chase there either way.

Deck, trucks, and wheels are different. These are the parts where fit and sizing actually change how the board feels, so buying the cheapest option just to save $10-20 can leave you with a board that doesn't suit your height, weight, or style. Spend where fit matters, save where it doesn't, and see our guide to common setup mistakes for the ones that cost more than money to get wrong.

FAQ

How much does a full skateboard setup cost?

$140–$250 for a typical custom build from separate parts, or closer to $90–100 if you go budget on every piece. Premium decks and bearings are usually what pushes a build toward the higher end.

Is it cheaper to buy a complete or build custom?

A complete is usually cheaper upfront, since it's one purchase instead of several. Custom costs more but lets you pick the exact trucks, wheels, and bearings that fit you, and avoids the low-quality parts that show up on the cheapest big-box completes. A complete from a real skate brand sidesteps that problem while still costing less than building custom.

What's the most expensive part of a setup?

Usually the deck, followed by bearings if you go premium or ceramic. Trucks, wheels, hardware, and grip tape tend to cost less and vary less by comparison.

Start Building

Get the parts, then put them together.